DaVinci has been the leader in composite roofing for nearly two decades. You won't find a more realistic or better-performing roofing product anywhere.
Get the look you’ve always dreamed of … DaVinci was made for your home. We want to help you be absolutely sure that your DaVinci roof is exactly what you envisioned.
From education programs to installations details, we specialize in supporting you in creating projects that make you look good.
Experienced DaVinci representatives are available to assist with product or color selection, finding a contractor or project timing … we're here to help.
Deciding how much waste should be figured for the different DaVinci roofing products requires the contractor to answer a few questions.
If the answer to all of these questions is yes then DaVinci Multi-Width Slate and Shake can be installed with < 1% waste; unless there are valleys in the roof which don’t have corresponding hips. In that case there is 1 square of waste for every 100 linear feet of valley (that counts both sides of the valley). Single-Width Slate and Shake can be installed with < 2% waste with the same stipulation as above.
Bellaforté Slate and Shake will have more waste than our other products because often times the remnant of a cut cannot be reused. A good rule of thumb for the Bellaforté products is 4% waste with a conservative installer but that can go up to 8% if the installers are not conscientious about saving material.
For tips to help eliminate waste in valleys, please read Installing DaVinci Tiles With No Waste.
Tell us about your new masterpiece and your DaVinci Experience.